Grants and funding for social organisations
- 21818
- open calls
- 9
- countries
- 15
- official sources
We bring together public funding calls from Spain, the European Union and other countries in one place. Each listing shows the amount, the real deadline and who can apply, so you can tell at a glance whether your organisation fits.
Grants by organisation type
Open calls
Results update automatically as you type
21,818 calls · sorted by Closing soonest
Acquire and hold land on behalf of local authorities (16)
France · Nouvelle-Aquitaine
Who can apply Commune · Intercommunalité / Pays · Département
The Nouvelle-Aquitaine Public Land Establishment (EPFNA) is a public operator of the State serving local authorities to support their territorial development projects. As an expert in land matters, it provides its engineering and intervention tools to manage the land component of development operations. The EPFNA is governed by decree n° 2008-645 dated June 30, 2008, modified by decree n° 2017-837 of May 5, 2017. It serves the territories of 10 departments of Nouvelle-Aquitaine: Charente, Charente-Maritime, Creuse, Corrèze, Dordogne, Deux-Sèvres, Gironde, Haute-Vienne, Vienne and Lot-et-Garonne (excluding the communes of the Agen agglomeration). Its intervention allows the mobilization of land, built or unbuilt, for the realization of local authority projects, in accordance with article 321-1 of the Urban Planning Code, with the objective of: * promoting access to housing, particularly by supporting the production of social housing * revitalizing urban centers, maintaining employment in the territories with the aim of territorial cohesion * redeveloping brownfields (craft, industrial, residential, ...) * preventing natural or technological risks Its operational scope of competence concerns:
Benefit from studies supporting rewilding operations in the city
France · FR
Who can apply Commune · Intercommunalité / Pays · Département · Région · Collectivité d’outre-mer à statut particulier · Etablissement public dont services de l'Etat · Entreprise publique locale (Sem, Spl, SemOp)
Slowing down urbanization and rewilding urban environments are becoming two essential and complementary strategies. They are all the more pressing as biodiversity is declining sharply in cities, the effects of climate change (runoff, floods, urban heat islands) are intensifying, and health and well-being are deteriorating in metropolitan areas. However, our cities are full of unnecessarily asphalted or concreted spaces where nature could reclaim its rights. This potential, currently poorly quantified, could be mobilized to enlarge natural spaces, connect them, reopen urban rivers, restore wetlands, and create new natural spaces. To meet this challenge, local authorities and their public and private partners first need to identify priority areas for rewilding and recommendations for technical support. URBAN PLANNING AGENCIES, AGILE ENGINEERING TOOLS Tools serving the public interest Urban planning agencies are associations under the 1901 law. The board of directors or the executive committee pilots the strategy; the general assembly is the decision-making body. This is composed of representatives of all members of the association. The content of the missions…
Be supported in carrying out an inventory of economic activity zones (ZAE)
France · FR
Who can apply Commune · Intercommunalité / Pays · Département · Région · Collectivité d’outre-mer à statut particulier · Etablissement public dont services de l'Etat · Entreprise publique locale (Sem, Spl, SemOp)
In a context of land scarcity, economic activity zones (ZAE) represent a significant portion of artificialized land whose uses need to be rethought due to their loss of attractiveness. Considered as an activity zone are: "industrial, commercial, tertiary, craft, tourist, port or airport activity zones". To improve knowledge about ZAEs and reflect on their requalification potential, the law requires local authorities to carry out an inventory of their economic activity zones. The inventory must be established by the EPCI, which is the competent authority for the creation, development and management of activity zones. The inventory must contain three stages: A cadastral statement of the land units of the economic activity zone (which identifies the surface area of each land unit and the owner); Identification of the occupants of the economic activity zone; Identification of the vacancy rate of the activity zone. Vacancy is defined according to three criteria: An absence of assignment of the land unit to "an activity subject to the business property tax (CFE); A vacancy period greater than or equal to 2 years; Unoccupied during the same…
Be supported in creating an observatory of priority sectors for energy poverty
France · FR
Who can apply Commune · Intercommunalité / Pays · Département · Région · Collectivité d’outre-mer à statut particulier · Etablissement public dont services de l'Etat · Entreprise publique locale (Sem, Spl, SemOp)
Housing with high energy consumption and/or greenhouse gas emissions (classified E, F, G) will gradually be subject to rental restrictions and prohibitions. These are therefore priority targets for public housing renovation policy. Given their construction period, their typology (individual houses, co-ownerships), their size, their heating energy, or their occupancy status, these dwellings will not require the same type of rehabilitation or household support. A detailed territorial knowledge of housing and its energy precariousness is essential to guide the strategic choices of communities regarding the renovation of the housing stock, whether public or private. Urban planning agencies are territorial engineering tools that carry out observation missions. They have developed expertise in identifying "thermal sieves" and in the territorial strategies to be implemented. URBAN PLANNING AGENCIES, AGILE ENGINEERING TOOLS Urban planning agencies participate in territorial observation To develop their intervention strategies and their implementation, communities have a crucial need for precise, objective, and… territorial knowledge.
Being supported to create a wasteland observatory
France · FR
Who can apply Commune · Intercommunalité / Pays · Département · Région · Collectivité d’outre-mer à statut particulier · Etablissement public dont services de l'Etat · Entreprise publique locale (Sem, Spl, SemOp)
Introduced by the Climate and Resilience Law of August 22, 2021, the objective of Net Zero Artificialization (ZAN) aims to reduce urban sprawl as much as possible by limiting, on the one hand, constructions on natural, agricultural or forest areas and, on the other hand, compensating for urbanization by giving greater prominence to nature in urbanized areas. Wastelands are now perceived as an opportunity to achieve the ZAN objectives, but it is still necessary to know how to identify them and know their characteristics. Given their characteristics, their location, the context and the dynamics in which they are inscribed, it may be preferable to favor urban renewal operations (housing, industry, data centers, offices...), or on the contrary to de-impermeabilize and re-naturalize them in order to address environmental issues (lack of green spaces, floods, urban heat islands...), to preserve those that have rewilded and now constitute biodiversity reservoirs, or to restore agricultural areas. Urban planning agencies are territorial engineering tools that carry out observation missions. They have developed significant expertise in identifying wastelands and their potential. URBAN PLANNING AGENCIES, TOOLS FOR...
Be supported in creating a housing and land observatory (OHF)
France · FR
Who can apply Commune · Intercommunalité / Pays · Département · Région · Collectivité d’outre-mer à statut particulier · Etablissement public dont services de l'Etat · Entreprise publique locale (Sem, Spl, SemOp)
The Climate and Resilience Law of August 22, 2021, provides for the evolution of former housing observation systems into housing and land observatories (OHF). These observatories must be created no later than three years after the implementation of a PLH. Urban planning agencies are territorial engineering tools that carry out observation missions. The climate law has strengthened their role, as well as that of EPFs, to help communities in setting up these tools. The housing and land observatories (OHF) are tasked with monitoring the real estate and land markets and identifying available land. This analysis is based on the inventory of buildable brownfields, vacant premises, areas to be densified, areas with challenges and surfaces for elevation, unsealed or eco-developable surfaces and unbuilt spaces necessary for maintaining ecological continuities in urbanized areas, and on an inventory of economic activity zones and on the monitoring of the housing stock (private, social, homeownership, degraded housing). The observatories must report annually on the number of housing units built on already urbanized areas and on areas open to urbanization. URBAN PLANNING AGENCIES, TOOLS FOR…
Nanoscale Interactions
United States · US
Who can apply Unrestricted (i.e., open to any type of entity above), subject to any clarification in text field entitled "Additional Information on Eligibility"
The Nanoscale Interactions program is part of theEnvironmental Engineering and Sustainabilitycluster, which also includes: 1) the Environmental Engineering program; and 2) the Environmental Sustainability program. The goal of theNanoscale Interactionsprogram is to support research toadvance fundamental and quantitative understanding of the interactions of nanomaterials and nanosystems with biological andenvironmental media. Materials of interest include one- to three-dimensional nanostructures, heterogeneous nano-bio hybrid assemblies, dendritic and micelle structures, quantum dots, and other nanoparticles.Such nanomaterials and systems frequently exhibit novel physical, chemical, photonic, electronic, and biological behavior as compared to the bulk scale. Collaborative and interdisciplinary proposals are encouraged. Research areas supported by the program include: Characterizationof interactions at the interfacesof nanomaterials and nanosystems,including both simple nanoparticles andcomplex and/or heterogeneouscomposites and nanosystems, with surrounding biological and environmental media; Developmentof predictive toolsbased on the fundamental behavior ofnanostructures to advancecost-effective and environmentally benignprocessing and engineeringsolutions over full-life material cycles; Examinationof the transport, interaction, and impact of nanostructured materials andnanosystems on biological systems and the environment; Simulationsof nanoparticle behavior at interfaces, in conjunction with experimentalcomparisons, and new theories and simulation approaches for determiningthe transport and transformation of nanoparticles in various media; and Investigations of quantum vibronic and spin phenomena with correlations to nano phenomena. The Nanoscale Interactions program will support exploratory research projects on nanoscale interactions of quantum effects which explain macroscopic changes and physiological and metabolic processes; investigate quantum vibration and electron spin to elucidate nano phenomena and produce quantitative data and evidence of quantum effects. Research in these areas will enable the design of nanostructured materials and heterogeneous nanosystems with desired chemical, electronic, photonic, biological, and mechanical properties for optimal and sustainable handling, manufacture, and utilization. NOTE : Studies that focus on fundamental research concerning atomic- and molecular-scale interfacial phenomena and engineering of interfacial properties, processes, and materials, particularly as relevant towards advancing industrial chemical or biochemical processes, may be more appropriate for theInterfacial Engineeringprogram (CBET 1417). Please consult with program directors prior to submission if you have questions about programmatic fit. Innovative proposals outside of these specific interest areas may be considered. However, prior to submission, it is recommended that the Principal Investigator contact the program director to avoid the possibility of the proposal being returned without review. INFORMATION COMMON TO MOST CBET PROGRAMS Proposals should address the novelty and/or potentially transformative nature of the proposed work compared to previous work in the field. Also, it is important to address why the proposed work is important in terms of engineering science, as well as to also project the potential impact on society and/or industry of success in the research. The novelty or potentially transformative nature of the research should be included, as a minimum, in the Project Summary of each proposal. The duration of unsolicited proposal awards in CBET is generally up to three years. Single-investigator award budgets typically include support for one graduate student (or equivalent) and up to one month of PI time per year(awards for multiple investigator projects are typically larger). Proposal budgets that are much larger than typical should be discussed with the program director prior to submission. Proposers can view budget amounts and other information from recent awards made by this program via the “What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)” link towards the bottom of this page. Faculty Early Career Development(CAREER) program proposals are strongly encouraged. Award duration is five years. The submission deadline for Engineering CAREER proposals is in July every year. Learn more in the CAREER program description . Proposals for Conferences, Workshops, and Supplements : PIs are strongly encouraged to discuss their requests with the program director before submission of the proposal. Grants forRapid Response Research(RAPID) and EArly-concept Grants for Exploratory Research(EAGER) are also considered when appropriate.Please note that proposals of these types must be discussed with the program director before submission. Grant Opportunities for Academic Liaison with Industry (GOALI) proposals that integrate fundamental research with translational results and are consistent with the application areas of interest to each program are also encouraged. Please note that RAPID, EAGER, and GOALI proposals can be submitted anytime during the year. Details about RAPID, EAGER, and GOALI are available in the Proposal & Award Policies & Procedures Guide(PAPPG), Part 1, Chapter II, Section E: Types of Proposals . Compliance : Proposals that are not compliant with the Proposal & Award Policies & Procedures Guide (PAPPG) will be returned without review.
Thermal Transport Processes
United States · US
Who can apply Unrestricted (i.e., open to any type of entity above), subject to any clarification in text field entitled "Additional Information on Eligibility"
TheThermal Transport Processesprogram is part of the Transport Phenomena cluster, which alsoincludes1) theCombustion and Fire Systemsprogram; 2) theFluid Dynamicsprogram; and 3) theParticulate and Multiphase Processesprogram. TheThermal Transport Processesprogram supports engineering research projects that lay the foundation for newadvances in thermal transport phenomena. These projects should either develop new fundamental knowledge or combine existing knowledge in thermodynamics, fluid mechanics, and heat and mass transfer to probe new areas of innovation in thermal transport processes. The program seeks transformative projects with the potential for improvingbasic understanding, predictability and application of thermal transport processes. Projects should articulate the contribution(s) to the fundamental knowledge supporting thermal transport processes and state clearly the potential application(s) impact when appropriate.Projects that combine analytical, experimental and numerical efforts, geared toward understanding, modeling and predicting thermal phenomena, are of great interest.Collaborative and interdisciplinary proposals for which the main contribution is in thermal transport fundamentals are also encouraged. Emphasis is placed on research that demonstrates how thermal transport phenomena affect the existence, behavior and dynamics of components and systems.Priority is given to insightful investigations of fundamental problems with clearly defined economic, environmental and societal impacts. Some specific areas of interest include: Convection/diffusion/radiation: Heat and mass transport incomplex structures and surfaces;thermal-related turbulence; development of form-functionrelationships in thermal processes; thermal design methodology; phonon transport and interactions between energy carriers; radiationamplification, controlling, and extinction; interfacial gas-solid andliquid-solid thermal and species-driven phenomena. Thermodynamics: Thermal-electric energy conversion; battery-related thermal issues; power generation and propulsion; phase-change and supercritical energy cycles;non-equilibriumthermal processes. Biologicalheatand mass transport: Biomimicry;intra- andextra-cellular heat and mass transport; freeze resistancemechanisms;thermotherapy and thermoregulation; organ conservation(freezing and thawing); mass transport in biomedical and health systems. Nanothermics,microthermics,and mesothermics: Scaling upnanoscale heat transport processes or coupledheat-mass transport processes; utilization ofnew multi-functional, meta- and graded-materials in thermal transport;nano-texturingand phase-change; multi-scale thermal transport in aprocess. Thermal solutions to climate change: Decarbonizing industrial processes; novel heating and cooling technologies with minimal greenhouse gas emissions; thermal-driven clean energy concepts; thermal and thermochemical energy storage; waste heat recovery and transmission; thermal science and technology to enable electrification of energy services. Thermal science and quantum technology interface: Quantum sensors for thermal measurements;quantum computing for thermal sciences;thermodynamics and novel cryogenic cooling concepts for quantum devices;thermal transport in quantum materials and quantum phenomena; thermal solutions for next-generation qubits, qubit coupling, and quantum information storage. New metrology and artificial intelligence (AI)/machinelearning methodologies in thermal sciences: Advanced thermal imagingand measurement techniques for high-resolutionin situthermal imaging and non-invasive temperature measurement; novel AI/machine learning methodologies and other data-intensive approaches that can be coupled with physics-based models and/or experiments to enable new understanding and discoveries in thermal transport processes. NOTE: Proposalsincluding chemical kinetics should be submitted to the ENG/CBETCombustion and FireSystemsprogram. Proposals dealing mainly with materials synthesis, processing and characterization should be directed to the ENG/CMMIAdvanced Manufacturingprogram or the Division of Materials Research (DMR) in the Directorate for Mathematical and Physical Sciences (MPS). Proposals at the interface of computational/mathematical sciences and thermal transport are encouraged but should be submitted to theComputational and Data-Enabled Science & Engineering(CDS&E) program. Proposals seeking the utilization of the International Space Station U.S. National Laboratory should follow the instructions in the NSF/CASIS solicitations (e.g., NSF 22-539). Proposals related to the Air Force Office of Scientific Research (AFOSR) general area of thermal transport properties of novel materials and heterostructures should be submitted as regular proposals to theThermal Transport Processesprogram. Those proposals may be jointly reviewed by NSF and AFOSR using the NSF merit review process. Actual funding format and agency split for an award (depending on availability of funds) will be determined after the proposal selection process. Proposals related to the Department of Energy (DOE) general area of thermal and thermochemical energy storage materials and processes should be submitted as regular proposals to theThermal Transport Processesprogram. In these cases, the PI should contact the program director to confirm suitability of the topic prior to submitting the proposal. Innovative proposals outside of these specific interest areas may be considered.However, prior to submission, it is recommended that the PI contact the program director to avoid the possibility of the proposal being returned without review. Innovative proposals outside of these specific interest areas may be considered.However, prior to submission, it is recommended that the Principal Investigator contact the program director to avoid the possibility of the proposal being returned without review. INFORMATION COMMON TO MOST CBET PROGRAMS Proposals should address the novelty and/or potentially transformative nature of the proposed work compared to previous work in the field.Also, it is important to address why the proposed work is important in terms of engineering science, as well as to also project the potential impact on society and/or industry of success in the research.The novelty or potentially transformative nature of the research should be included, as a minimum, in the Project Summary of each proposal. The duration of unsolicited proposal awards in CBET is generally up to three years. Single-investigator award budgets typically include support for one graduate student (or equivalent) and up to one month of PI time per year(awards for multiple investigator projects are typically larger). Proposal budgets that are much larger than typical should be discussed with the program director prior to submission. Proposers can view budget amounts and other information from recent awards made by this program via the "What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)" link towards the bottom of this page. Faculty Early Career Development(CAREER)program proposals are strongly encouraged.Award duration is five years.The submission deadline for Engineering CAREER proposals is in July every year. Learn more in the CAREER program description . Proposals for Conferences, Workshops, and Supplements: PIs are strongly encouraged to discuss their requests with the program director before submission of the proposal. Grants forRapid Response Research(RAPID)andEArly-concept Grants for Exploratory Research(EAGER)are also considered when appropriate.Please note that proposals of these types must be discussed with the program director before submission.Grant Opportunities for Academic Liaison with Industry (GOALI)proposals that integrate fundamental research with translational results and are consistent with the application areas of interest to each program are also encouraged. Please note that RAPID, EAGER, and GOALI proposals can be submitted anytime during the year. Details about RAPID, EAGER, and GOALI are available in the Proposal & Award Policies & Procedures Guide (PAPPG), Part 1, Chapter II, Section E: Types of Proposals. Compliance: Proposals that are not compliant with the Proposal & Award Policies & Procedures Guide (PAPPG) will be returned without review.
Particulate and Multiphase Processes
United States · US
Who can apply Unrestricted (i.e., open to any type of entity above), subject to any clarification in text field entitled "Additional Information on Eligibility"
TheParticulate and Multiphase Processesprogram is part of the Transport Phenomena cluster, which also includes 1) theCombustion and Fire Systemsprogram; 2) theFluid Dynamicsprogram; and 3) theThermal Transport Processesprogram. Thegoal of theParticulate and Multiphase Processesprogram is to support fundamental research on physico-chemical phenomena that govern particulate and multiphase systems, including flow of suspensions, drops and bubbles, granular and granular-fluid flows, behavior of micro- and nanostructured fluids, unique characteristics of active fluids, and self assembly/directed-assembly processes that involve particulates.The program encourages transformative research to improve our basic understanding of particulate and multiphase processes with emphasis on research that demonstrates how particle-scale phenomena affect the behavior and dynamics of larger-scale systems.Although proposed research should focus on fundamentals, a clear vision is required that anticipates how results could benefit important applications in advanced manufacturing, energy harvesting, transport in biological systems, biotechnology, or environmental sustainability.Collaborative and interdisciplinary proposals are encouraged, especially those that involve a combination of experiment with theory and/or modeling. Major research areas of interest in the program include: Multiphase flow phenomena:Dynamics ofparticle/bubble/droplet systems,behavior of structured fluids (colloids/ferro-fluids), granular flows, rheology of multiphase systems, unique characteristics of active fluids in novel applications, and newl approaches that relate micro- and nanoscale phenomena to macroscale properties and process-levelvariables. Particlescience and technology:Aerosols, production of particles andpolymer-particle complexes with engineered properties, self-assembly,directed assembly, and template-directed assembly of particles into functional materials and devices. Multiphase transport in biological systems:Analysis of physiological processes, applications of functionalized nanostructures in clinical diagnostics andtherapeutics. Interfacial transport:Dynamics of particles and macromolecules at interfaces, kinetics of adsorption and desorption of nanoparticles and surfactants and their spatial distributions at interfaces, complex molecular interactions at interfaces, formation of interfacial complexes that affect the dynamics of particles. NOTE: Proposals that explore fluid-structure interactions involving electrodes in engineering applications such as energy storage should be directed to ENG/CBETElectrochemical Systemsprogram.Proposals that involve drops or bubbles bouncing off solid surfaces should be directed toward ENG/CBETFluid Dynamicsprogram. Proposals that deal with engineered surfaces forcarrying out chemical or biochemical reactions or separations should be directed to ENG/CBETInterfacial Engineeringprogram.Proposals dealing mainly with particle synthesis may be more suitable forthe ENG/CMMIAdvanced Manufacturingprogram or the Division of Materials Research (DMR) in the Mathematical and Physical Sciences (MPS) Directorate. Innovative proposals outside of these specific interest areas may be considered; however, prior to submission, it is recommended that the PI contact the program director to avoid the possibility of the proposal being returned without review. INFORMATION COMMON TO MOST CBET PROGRAMS Proposals should address the novelty and/or potentially transformative nature of the proposed work compared to previous work in the field.Also, it is important to address why the proposed work is important in terms of engineering science, as well as to also project the potential impact on society and/or industry of success in the research.The novelty or potentially transformative nature of the research should be included, as a minimum, in the Project Summary of each proposal. The duration of unsolicited proposal awards in CBET is generally up to three years. Single-investigator award budgets typically include support for one graduate student (or equivalent) and up to one month of PI time per year(awards for multiple investigator projects are typically larger). Proposal budgets that are much larger than typical should be discussed with the program director prior to submission. Proposers can view budget amounts and other information from recent awards made by this program via the "What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)" link towards the bottom of this page. Faculty Early Career Development(CAREER)program proposals are strongly encouraged.Award duration is five years.The submission deadline for Engineering CAREER proposals is in July every year. Learn more in the CAREER program description . Proposals for Conferences, Workshops, and Supplements: PIs are strongly encouraged to discuss their requests with the program director before submission of the proposal. Grants forRapid Response Research(RAPID)andEArly-concept Grants for Exploratory Research(EAGER)are also considered when appropriate.Please note that proposals of these types must be discussed with the program director before submission.Grant Opportunities for Academic Liaison with Industry (GOALI)proposals that integrate fundamental research with translational results and are consistent with the application areas of interest to each program are also encouraged. Please note that RAPID, EAGER, and GOALI proposals can be submitted anytime during the year. Details about RAPID, EAGER, and GOALI are available in the Proposal & Award Policies & Procedures Guide (PAPPG), Part 1, Chapter II, Section E: Types of Proposals. Compliance: Proposalsthat are not compliant with the Proposal & Award Policies & Procedures Guide (PAPPG) will be returned without review.
Interfacial Engineering
United States · US
Who can apply Unrestricted (i.e., open to any type of entity above), subject to any clarification in text field entitled "Additional Information on Eligibility"
The Interfacial Engineering program is part of the Chemical Process Systems cluster, which also includes: 1) the Catalysis program; 2) the Electrochemical Systems program; and 3) the Process Systems, Reaction Engineering, and Molecular Thermodynamics program. The goal of the Interfacial Engineering program is to support fundamental research on atomic- and molecular-scale interfacial phenomena and engineering of interfacial properties, processes, and materials. Fundamental understanding of the thermodynamic, kinetic, and transport properties of interfacial systems underpins improvements in chemical process efficiency and resource utilization. As such, proposed research should have a clear vision for how the results will translate to practice in or otherwise advance industrial chemical or biochemical processes. The program encourages proposals that present new approaches to long-standing challenges or address emerging research areas and technologies. Collaborative and interdisciplinary proposals are also encouraged, particularly those that involve a combination of experiment with theory or modeling. Major research areas of interest in the program include: Chemical separations: Design of scalable mass separating agents (for example, sorbents and membranes); field-induced separation processes that target a significant reduction in energy and/or materials requirements Biological separations: Downstream processing of biologically-derived chemicals, therapeutic proteins, and biologics for increased throughput and purity; engineering interfaces for molecular recognition Interfacial phenomena at engineered interfaces and surfaces: Kinetics and thermodynamics of adsorption/desorption and complex interactions of molecules and ions at engineered interfaces and surfaces within chemical process systems Nanoconfinement and engineered surfaces: Theory, modeling, and/or approaches for examining transport and thermodynamic properties of fluids within nanopores, under nanoconfinement, or at highly engineered surfaces within chemical process systems NOTE: Studies that examine chemical reaction and transport phenomena related to electrochemical system performance, including batteries, fuel cells, flow batteries, electrochemical conversions, and related components, should be directed to the Electrochemical Systems program (CBET 7644). Studies that focus on interactions of nanomaterials and nanosystems, particularly as relevant to environmental or biological applications, may be more appropriate for the Nanoscale Interactions program (CBET 1179). Studies of how interfacial dynamics affect transport or bulk properties of multiphase systems may be more appropriate for the Particulate and Multiphase Processes program (CBET 1415). Please consult with program directors prior to submission if you have questions about programmatic fit. Innovative proposals outside of these specific interest areas may be considered. The Principal Investigator is encouraged contact the Program Director prior to submission to avoid the possibility of the proposal being returned without review. INFORMATION COMMON TO MOST CBET PROGRAMS Proposals should address the novelty and/or potentially transformative nature of the proposed work compared to previous work in the field.Also, it is important to address why the proposed work is important in terms of engineering science, as well as to also project the potential impact on society and/or industry of success in the research.The novelty or potentially transformative nature of the research should be included, as a minimum, in the Project Summary of each proposal. The duration of unsolicited proposal awards in CBET is generally up to three years. Single-investigator award budgets typically include support for one graduate student (or equivalent) and up to one month of principal investigator time per year(awards for multiple investigator projects are typically larger). Proposal budgets that are much larger than typical should be discussed with the Program Director prior to submission. Proposers can view budget amounts and other information from recent awards made by this program via the “What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)” link towards the bottom of this page. Faculty Early Career Development(CAREER)program proposals are strongly encouraged. Award duration is five years.The submission deadline for Engineering CAREER proposals is in July every year. Learn more in the CAREER program description . Proposals for Conferences, Workshops, and Supplements: PIs are strongly encouraged to discuss their requests with the Program Director before submission of the proposal. Grants forRapid Response Research(RAPID)andEArly-concept Grants for Exploratory Research(EAGER)are also considered when appropriate.Please note that proposals of these types must be discussed with the program director before submission. Grant Opportunities for Academic Liaison with Industry (GOALI)proposals that integrate fundamental research with translational results and are consistent with the application areas of interest to each program are also encouraged. Please note that RAPID, EAGER, and GOALI proposals can be submitted anytime during the year. Details about RAPID, EAGER, and GOALI are available in theProposal & Award Policies & Procedures Guide(PAPPG), Part 1, Chapter II, Section E. COMPLIANCE: Proposals which are not compliant with the Proposal & Award Policies & Procedures Guide (PAPPG) will be returned without review
Biophotonics
United States · US
Who can apply Unrestricted (i.e., open to any type of entity above), subject to any clarification in text field entitled "Additional Information on Eligibility"
TheBiophotonicsprogram is part of the Engineering Biology and Health cluster, which also includes: 1) theBiosensingprogram; 2) theCellular and Biochemical Engineeringprogram; 3) theDisability and Rehabilitation Engineeringprogram; and 4) theEngineering of Biomedical Systemsprogram. The goal of theBiophotonicsprogram is to explore the research frontiers in photonics principles, engineering and technology that are relevant for critical problems in fields of medicine, biology and biotechnology. Fundamental engineering research and innovation in photonics is required to lay the foundations for new technologies beyond those that are mature and ready for application in medical diagnostics and therapies. Advances are needed in nanophotonics, optogenetics, contrast and targeting agents, ultra-thin probes, wide field imaging, and rapid biomarker screening. Low cost and minimally invasive medical diagnostics and therapies are key motivating application goals. Research topics in this program include: Imaging in the second near infrared window:Research that advances medical applications of biophotonics in the second near-infrared window (NIR-II: 1,000-1,700 nm) in which biological tissues are transparent up to several centimeters in depth, making this spectral window ideal for deep tissue imaging. Macromolecule markers: Innovative methods for labeling of macromolecules. Novel compositions of matter. Methods of fabrication of multicolor probes that could be used for marking and detection of specific pathological cells.Pushing the envelope of optical sensing to the limits of detection, resolution, and identification. Low coherence sensing at the nanoscale: Low coherence enhanced backscattering (LEBS). N-dimensional elastic light scattering.Angle-resolved low coherence interferometry for early cancer detection (dysplasia). Neurophotonics:Studies of photon activation of neurons at the interface of nanomaterials attached to cells. Development and application of biocompatible photonic tools such as parallel interfaces and interconnects for communicating and control of neural networks. Microphotonics and nanophotonics:Development and application of novel nanoparticle fluorescent quantum-dots. Sensitive, multiplexed, high-throughput characterization of macromolecular properties of cells.Nanomaterials and nanodevices for biomedicine. Optogenetics: Novel research in employing light-activated channels and enzymes for manipulation of neural activity with temporal precision. Utilizing nanophotonics, nanofibers, and genetic techniques for mapping and studying in real-time physiological processes in organs such as the brain and heart. Innovative proposals outside of these specific interest areas may be considered. However, prior to submission, it is recommended that the Principal Investigator contact the program director to avoid the possibility of the proposal being returned without review. INFORMATION COMMON TO MOST CBET PROGRAMS Proposals should address the novelty and/or potentially transformative nature of the proposed work compared to previous work in the field. Also, it is important to address why the proposed work is important in terms of engineering science, as well as to also project the potential impact on society and/or industry of success in the research. The novelty or potentially transformative nature of the research should be included, as a minimum, in the Project Summary of each proposal. The duration of unsolicited proposal awards in CBET is generally up to three years. Single-investigator award budgets typically include support for one graduate student (or equivalent) and up to one month of PI time per year(awards for multiple investigator projects are typically larger). Proposal budgets that are much larger than typical should be discussed with the program director prior to submission. Proposers can view budget amounts and other information from recent awards made by this program via the “What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)” link towards the bottom of this page. Faculty Early Career Development(CAREER)program proposals are strongly encouraged. Award duration is five years. The submission deadline for Engineering CAREER proposals is in July every year. Learn more in the CAREER program description . Proposals for Conferences, Workshops, and Supplements: PIs are strongly encouraged to discuss their requests with the program director before submission of the proposal. Grants forRapid Response Research(RAPID)andEArly-concept Grants for Exploratory Research(EAGER)are also considered when appropriate. Please note that proposals of these types must be discussed with the program director before submission.Grant Opportunities for Academic Liaison with Industry (GOALI)proposals that integrate fundamental research with translational results and are consistent with the application areas of interest to each program are also encouraged. Please note that RAPID, EAGER, and GOALI proposals can be submitted anytime during the year. Details about RAPID, EAGER, and GOALI are available in the Proposal & Award Policies & Procedures Guide(PAPPG), Part 1, Chapter II, Section E: Types of Proposals. Compliance: Proposals that are not compliant with the Proposal & Award Policies & Procedures Guide (PAPPG) will be returned without review.
Environmental Sustainability
United States · US
Who can apply Unrestricted (i.e., open to any type of entity above), subject to any clarification in text field entitled "Additional Information on Eligibility"
TheEnvironmental Sustainability program is part of theEnvironmental Engineering and Sustainabilitycluster together with 1) theEnvironmental Engineeringprogram and 2) theNanoscale Interactionsprogram. The goal of theEnvironmental Sustainabilityprogram is to promote sustainable engineered systems that support human well-being and that are also compatible with sustaining natural (environmental) systems. These systems provide ecological services vital for human survival. Research efforts supported by the program typically consider long time horizons and may incorporate contributions from the social sciences and ethics. The program supports engineering research that seeks to balance society's need to provide ecological protection and maintain stable economic conditions. There are five principal general research areas that are supported. Circular Bioeconomy Engineering:This area includes research that enables sustainable societal use of food, energy, water, nitrogen, phosphorus, and materials, with the reduction and eventual elimination of fossil fuel combustion that lacks carbon capture. The program encourages research that helps build the raw material basis for the functioning of society principally on biomass, drawing heavily on sustainable agriculture and forestry. Additionally, material flows must reduce or preferably eliminate waste, with an emphasis on closed-loop or “circular” processing. Industrial ecology:Topics of interest include advancements in modeling such as life cycle assessment, materials flow analysis, net energy analysis, input/output economic models, and novel metrics for measuring sustainable systems. Innovations in industrial ecology are encouraged. Green engineering:Research is encouraged to advance the sustainability of manufacturing processes, green buildings, and infrastructure. Many programs in the Engineering Directorate support research in environmentally benign manufacturing or chemical processes. The Environmental Sustainability program supports research that would affect more than one chemical or manufacturing process or that takes a systems or holistic approach to green engineering for infrastructure or green buildings. Improvements in distribution and collection systems that will advance smart growth strategies and ameliorate effects of growth are research areas that are supported by Environmental Sustainability. Innovations in management of storm water, recycling and reuse of drinking water, and other green engineering techniques to support sustainability may also be fruitful areas for research. Ecological engineering:Proposals should focus on the engineering aspects of restoring ecological function to natural systems. Engineering research in the enhancement of natural capital to foster sustainable development is encouraged. Earth systems engineering:Earth systems engineering considers aspects of large-scale engineering research that involve mitigation of greenhouse gas emissions, adaptation to climate change, and other global concerns. All proposed research should be driven by engineering principles, and be presented explicitly in an environmental sustainability context. Proposals should include involvement in engineering research of at least one graduate student, as well as undergraduates. Incorporation of aspects of social, behavioral, and economic sciences is welcomed. NOTE: Water treatment, air pollution (both outdoor and indoor), soil remediation, and solid waste treatment proposals are to besubmitted to theEnvironmental Engineeringprogram (CBET 1440). Innovative proposals outside the scope of the four core areas mentioned above may be considered. However, prior to submission, it is recommended that the Principal Investigator contact the program director to avoid the possibility of the proposal being returned without review. For proposals that call for research to be done on regions that are outside of the United States, an explanation must be presented of the potential benefit of the research for the United States. INFORMATION COMMON TO MOST CBET PROGRAMS Proposals should address the novelty and/or potentially transformative nature of the proposed work compared to previous work in the field. Also, it is important to address why the proposed work is important in terms of engineering science, as well as to also project the potential impact on society and/or industry of success in the research. The novelty or potentially transformative nature of the research should be included, as a minimum, in the Project Summary of each proposal. The duration of unsolicited proposal awards in CBET is generally up to three years. Single-investigator award budgets typically include support for one graduate student (or equivalent) and up to one month of PI time per year(awards for multiple investigator projects are typically larger). Proposal budgets that are much larger than typical should be discussed with the program director prior to submission. Proposers can view budget amounts and other information from recent awards made by this program via the “What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)” link towards the bottom of this page. Faculty Early Career Development(CAREER)program proposals are strongly encouraged. Award duration is five years. The submission deadline for Engineering CAREER proposals is in July every year. Learn more in the CAREER program description . Proposals for Conferences, Workshops, and Supplements: PIs are strongly encouraged to discuss their requests with the program director before submission of the proposal. Grants forRapid Response Research(RAPID)andEArly-concept Grants for Exploratory Research(EAGER)are also considered when appropriate.Please note that proposals of these types must be discussed with the program director before submission.Grant Opportunities for Academic Liaison with Industry (GOALI)proposals that integrate fundamental research with translational results and are consistent with the application areas of interest to each program are also encouraged. Please note that RAPID, EAGER, and GOALI proposals can be submitted anytime during the year. Details about RAPID, EAGER, and GOALI are available in the Proposal & Award Policies & Procedures Guide(PAPPG), Part 1, Chapter II, Section E: Types of Proposals . Compliance: Proposals that are not compliant with the Proposal & Award Policies & Procedures Guide (PAPPG) will be returned without review.
Electrochemical Systems
United States · US
Who can apply Unrestricted (i.e., open to any type of entity above), subject to any clarification in text field entitled "Additional Information on Eligibility"
TheElectrochemical Systemsprogram is part of the Chemical Process Systems cluster, which also includes: 1) theCatalysisprogram; 2) theInterfacial Engineeringprogram; and 3) theProcess Systems, Reaction Engineering, and Molecular Thermodynamicsprogram. The goal of theElectrochemical Systemsprogram is to support fundamental engineering science research that will enable innovative processes involving electrochemistry or photochemistry for the sustainable production of electricity, fuels, chemicals, and other specialty and commodity products. Processes utilizing electrochemistry or photochemistry for sustainable energy and chemical production must be scalable, environmentally benign, reduce greenhouse gas production, and utilize renewable resources. Research projects that stress fundamental understanding of phenomena that directly impact key barriers to improved system or component-level performance (for example, energy efficiency, product yield, process intensification) are encouraged. Processes for energy storage should address fundamental research barriers for renewable electricity storage applications, for transport propulsion, or for other applications that could have impact towards climate change mitigation. For projects concerning energy storage materials, proposals should involve testable hypotheses that involve device or component performance characteristics that are tied to fundamental understanding of transport, kinetics, or thermodynamics. Advanced chemistries beyond lithium-ion are encouraged. Proposed research on processes utilizing electrochemistry or photochemistry should be inspired by the need for economic and impactful conversion processes. All proposal project descriptions should address how the proposed work, if successful, will improve process realization and economic feasibility and compare the proposed work against current state of the art. Highly integrated multidisciplinary projects are encouraged. When appropriate, collaborations with industrial technologists are encouraged through GOALI proposals. Collaborative projects with an integrated experimental and theoretical approach are also encouraged. Topics of interest include electrochemical energy storage and electrochemical production/conversion systems. Radically new battery systems can move the U.S. more rapidly toward a more sustainable transportation future and to greater renewable electricity production penetration. High-energy density and high-power density batteries suitable for transportation and renewable energy storage applications are of primary interest. Advanced systems involving metal anodes, solid-state electrolytes, nonaqueous systemsbeyond lithium, aqueous systems beyond lithium,and multivalent chemistries are encouraged. Research activities focused on commercially available systems such as lead-acid and nickel-metal hydride batteries or lithium-ion batteries for medical or consumer electronics applications will not be considered by this program. Novel electrochemical and photochemical systems and processes for the production of chemicals and high-value products are encouraged. Emphasis is placed on those systems that improve process intensification and process modularization with accompanying benefits in energy efficiency and environmental footprint. Additional fundamental science topics of interest to this program include the study of: advanced fuel cell systems or fuel cell components for transportation propulsion or grid energy storage applications; flow batteries for stationary energy storage applications including alternative redox chemistries (e.g., organic, inorganic, organometallic, macromolecular) and operating strategies (e.g., redox-mediation, suspensions); and photocatalytic or photoelectrochemical processes and devices for the splitting of water into hydrogen gas or for the reduction of carbon dioxide to liquid or gaseous fuels. Projects that largely focus on developing fundamental understanding of the catalytic reaction mechanisms and structure-function relationships may be more appropriate as submissions to the CBET Catalysis program (CBET 1401). Projects submitted to the Electrochemical Systems program are expected to develop fundamental, molecular-level understanding of the key chemical reaction and transport phenomena barriers to improved system-level performance. Innovative proposals outside of these specific interest areas may be considered. However, prior to submission, it is recommended that the Principal Investigator contact the program director to avoid the possibility of the proposal being returned without review. Referrals to other programs within NSF: Proposals that focus on electric-field driven separations such as dielectrophoresis should be directed to theInterfacial Engineeringprogram (CBET 1417). Proposals that focus on thermal management of energy storage devices and systems should be submitted to theThermal Transport Processesprogram (CBET 1406). Proposals that focus on improving device and system performance of primarily organic, inorganic, and hybrid photovoltaic (PV) technologies, including perovskites, may be more appropriate as submissions to the Electronics, Photonics, and Magnetic Devices program in Engineering's Division of Electrical, Communications, and Cyber Systems (ECCS 1517). PV materials proposals that focus on the material science may be considered in the Division of Materials Research of the Directorate for Mathematical and Physical Sciences. Proposals that focus on the generation of thermal energy by solar radiation should be directed to theThermal Transport Processesprogram (CBET 1406). INFORMATION COMMON TO MOST CBET PROGRAMS Proposals should address the novelty and/or potentially transformative nature of the proposed work compared to previous work in the field. Also, it is important to address why the proposed work is important in terms of engineering science, as well as to also project the potential impact on society and/or industry of success in the research. The novelty or potentially transformative nature of the research should be included, as a minimum, in the Project Summary of each proposal. The duration of unsolicited proposal awards in CBET is generally up to three years. Single-investigator award budgets typically include support for one graduate student (or equivalent) and up to one month of principal investigator time per year(awards for multiple investigator projects are typically larger). Proposal budgets that are much larger than typical should be discussed with the Program Director prior to submission. Proposers can view budget amounts and other information from recent awards made by this program via the “What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)” link towards the bottom of this page. Faculty Early Career Development(CAREER)program proposals are strongly encouraged. Award duration is five years.The submission deadline for Engineering CAREER proposals is in July every year. Learn more in the CAREER program description . Proposals for Conferences, Workshops, and Supplements: PIs are strongly encouraged to discuss their requests with the Program Director before submission of the proposal. Grants forRapid Response Research(RAPID)andEArly-concept Grants for Exploratory Research(EAGER)are also considered when appropriate. Please note that proposals of these types must be discussed with the program director before submission.Grant Opportunities for Academic Liaison with Industry (GOALI)proposals that integrate fundamental research with translational results and are consistent with the application areas of interest to each program are also encouraged. Please note that RAPID, EAGER, and GOALI proposals can be submitted anytime during the year. Details about RAPID, EAGER, and GOALI are available in theProposal & Award Policies & Procedures Guide(PAPPG), Part 1, Chapter II, Section E: Types of Proposals. COMPLIANCE: Proposals which are not compliant with the Proposal & Award Policies & Procedures Guide (PAPPG) will be returned without review.
Carry out studies and works on historical monuments
France · FR
Who can apply Commune · Intercommunalité / Pays · Département · Région · Collectivité d’outre-mer à statut particulier · Entreprise publique locale (Sem, Spl, SemOp)
Each year, several thousand buildings and movable objects protected as historical monuments (MH) are subject to studies and works of maintenance, repair, restoration or safety. Owners of buildings or movable objects classified or listed as historical monuments may, under certain conditions, benefit from subsidies for these studies and works. → What is a historical monument? A historical monument is a building (built or unbuilt: building, work of art, garden, public square, decorated cave, archaeological site, etc.) or a movable object (art object, furniture, organ, boat, machine, etc.) receiving a legal status intended to protect it for its interest historical, artistic, technical or scientific so that it can be preserved, restored and enhanced. This status of “historical monument” is a recognition by the Nation of the heritage interest of a property. This protection implies a shared responsibility between the owners and the national community with regard to its conservation and its transmission to future generations. There are two levels of protection for historical monuments: inscription and classification. The mo…
HORIZON-CL6-2024-GOVERNANCE-01
European Union · EU
Who can apply Commune · Intercommunalité / Pays · Département · Région · Collectivité d’outre-mer à statut particulier · Etablissement public dont services de l'Etat
Horizon Europe - 2021-2027 Horizon Europe - Pillar 2: Global Issues and Industrial Competitiveness - 2021-2027 Horizon Europe - 2.6 Food, Bioeconomy, Natural Resources, Agriculture and Environment - 2021-2027 ----- Horizon Europe - Innovative governance, environmental observations and digital solutions in support of the Green Deal to accelerate and master the innovative solutions needed for the transformation of the food system and the implementation of sustainable solutions. ----- Detailed budget per topic below ----- Amount per topic: HORIZON-CL6-2024-GOVERNANCE01-1 : 60 million euros HORIZON-CL6-2024-GOVERNANCE01-10 : 4 million euros HORIZON-CL6-2024-GOVERNANCE01-11 : 3 million euros HORIZON-CL6-2024-GOVERNANCE01-12 : 4 million euros HORIZON-CL6-2024-GOVERNANCE01-13 : 4 million euros HORIZON-CL6-2024-GOVERNANCE01-2 : 3.5 million euros HORIZON-CL6-2024-GOVERNANCE01-3 : 3 million euros HORIZON-CL6-2024-GOVERNANCE01-4 : 4 million euros HORIZON-CL6-2024-GOVERNANCE01-5 : 19 million euros HORIZON-CL6-2024-GOVERNANCE01-6 : 8 million euros HORIZON-CL6-2024-GOVERNANCE01-7 : 15 million euros HORIZON-CL6-2024-GOVERNANCE…
HORIZON-MSCA-2023-SE-01
European Union · EU
Who can apply Etablissement public dont services de l'Etat
Horizon Europe - 1.2 Marie Sklodowska-Curie Actions - 2021-2027 ----- Horizon Europe - MSCA Staff Exchanges 2023 aiming to promote innovative international, intersectoral and interdisciplinary collaboration in the field of research and innovation through staff exchange and the sharing of knowledge and ideas at all stages of the innovation chain ----- 78.5 million euros ----- ----- ----- Some funding under the Horizon Europe program is structured in response to political ambitions ("destinations") and deployed through calls for proposals ("Calls for proposals") targeting more specific themes or sectors ("Topics"). Thus, your application must be directly related to a topic of a call for proposals. Different categories of projects are eligible: RIA, Research and Innovation Actions: Basic and applied research / Technology development and adoption / Testing and validation of a prototype in the laboratory IA, Innovation Actions: Prototypes, tests, demonstrations, pilot projects, market placement. These actions may include a component limited to R&D activities CSA, Coordination and Support Actions: Networking, studies & conferences, communication, studies for new research infrastructures MSCA…
Implement agricultural, forestry, and environmental land management (AFAFE)
France · Grand Est
Who can apply Commune
In application of Title II of Book 1 of the rural and maritime fishing code, various modes of rural land management (former agricultural land consolidation, amicable exchanges and transfers of forest plots) can be implemented and supported by the Department, according to the intervention and financing regulations accessible by clicking on the "More information" button below.
Support for fruit and/or truffle orchard planting projects
France · Grand Est
Who can apply Commune · Intercommunalité / Pays
A significant decline in the density of fruit orchards is observed in our countryside, due to the aging of trees and storms that lead to the gradual disappearance of many of them. In addition, Haute-Marne is renowned for its Burgundy truffles (Tuber uncinatum). In rural areas, the orchard is an essential component of our villages' heritage, through its social dimension (rural traditions and know-how linked to local fruit production), its landscape aspect, and its role in biodiversity (especially birds). To this end, the Department financially supports rural actors who plan the planting of fruit and/or truffle trees. For more details (conditions for accessing funding and other modalities), see the action sheet by clicking on the button below "More information".
Support for projects to plant hedges and shrub and/or tree vegetation elements
France · Grand Est
Who can apply Commune · Intercommunalité / Pays
Barrier to water runoff, soil stabilization, road protection in snowdrift areas, landscape green infrastructure element, agronomic contribution, ... the positive contribution of hedges to the quality of our agricultural plains are multiple. The Department financially supports rural actors who plan to plant hedges in their territories. For more details (conditions for accessing funding and other modalities), see the action sheet by clicking on the button below "More information".
Support for aquatic environments and wetlands development projects
France · Grand Est
Who can apply Commune · Intercommunalité / Pays
Support for development projects in aquatic environments and wetlands, provided that the interventions are recognized as bringing a significant environmental gain, enhancing and protecting these natural environments. In addition, generally speaking, the projects presented must include a component related to "climate change mitigation/adaptation", and be based on a diagnostic study or a prospective study (global study, etc.) approved by the Department. For more details (conditions for access to funding and other terms), see the action sheet by clicking on the "More information" button below.
Support local projects for sensitive natural areas
France · Grand Est
Who can apply Commune · Intercommunalité / Pays · Département · Etablissement public dont services de l'Etat
As part of the 4 themes of water resource and wetland protection, sports and nature sites, remarkable gardens and remarkable natural environments, the Department provides financial support to local authorities that intervene to acquire rural property plots, carry out development work necessary to welcome the public, carry out environmental and landscape management and maintenance work, and promote educational and training actions. Land ownership being a guarantee of success in site development, the local project leader must justify an active land acquisition approach. In the case of land ownership other than public (private, association), a partnership agreement between the Department / Public body carrying out the local project / private owner or association setting out the commitments of each may be formalized. Projects concerning labeled sites and having an emblematic character at the departmental level will be prioritized. For more details (conditions for access to funding and other modalities), see the action sheet by clicking on the button below "More information".
Training on health-promoting urban planning [training]
France · FR
Who can apply Commune · Intercommunalité / Pays · Département · Région
The educational module on health-promoting urban planning from the e-set BFC portal aims to provide local authorities with keys to understanding how to develop and promote the challenges of health-promoting urban planning in their development policies. But what is health-promoting urban planning? Why and how to do it? You will also find feedback from local authorities in Bourgogne-Franche-Comté that have implemented urban projects promoting health. Link: https://www.sante-environnement-bfc.fr/capsules/urbanisme-et-cadre-de-vie-favorables-a-la-sante/#/
Fluid Dynamics
United States · US
Who can apply Unrestricted (i.e., open to any type of entity above), subject to any clarification in text field entitled "Additional Information on Eligibility"
TheFluid Dynamicsprogram is part of the Transport Phenomena cluster, which also includes 1) theCombustion and Fire Systemsprogram; 2) theParticulate and Multiphase Processesprogram; and 3) theThermal Transport Processesprogram. TheFluid Dynamicsprogram supports fundamental research toward gaining an understanding of the physics of various fluid dynamics phenomena. Proposed research should contribute to basic scientific understanding via experiments, theoretical developments, and computational discovery. Major areas of interest and activity in the program include: Turbulence and transition: High Reynolds number experiments; large eddy simulation; direct numerical simulation; transition to turbulence; 3-D boundary layers; separated flows; multi-phase turbulent flows; flow control and drag reduction. High-speed boundary layer transition and turbulence at Mach numbers greater than 5 to understand modal and/or non-modal interactions leading to boundary layer transition and the ensuing developing and fully developed turbulent boundary layer flows.Combined experiments and simulations are encouraged. Bio-fluid physics:Bio-inspired flows; biological flows with emphasis on flow physics. Non-Newtonian fluid mechanics:Single-phase viscoelastic flows; solutions of macro-molecules. Bubble dynamics: Bubbles related to cavitation and/or drag reduction or impacting the fluid viscosity (locally) or manipulation of bubbles with external excitation (acoustofluidics). Microfluidics and nanofluidics: Micro-and nano-scale flow physics. Wind and ocean energy harvesting: Focused on fundamental fluid dynamics associated with renewable energy. The NSF-DOE (Department of Energy) joint funding area is focused on high Reynolds number aerodynamics of thick airfoils (> 21% thickness/chord) operating in complex (3D) steady, unsteady, and separated flows. Impacts of blade surface quality/roughness rotor performance on the aerodynamic/aeroelastic performance of novel rotor geometries and supporting structures are also of interest. Air/sea interactions, including waves/currents, on the hydrodynamic loading for offshore wind turbines. Improved measurement techniques and sensing/control technologies required to characterize the metocean environment impact on performance. The DoE participates in this initiative throughthe Wind Energy Technologies Office (program manager Michael Derby, email: michael.derby@ee.doe.gov). Fluid-structure interactions:General FSI applications across the low- to high-Reynolds number range are of interest to NSF. In addition, NSF-AFOSR (Air Force Office of Scientific Research) joint funding area is focused on theory, modeling and/or experiments for hypersonic applications. AFOSR participates in this initiative through the Aerothermodynamics program. Canonicalconfigurations:Experimental research is encouraged to develop spatiotemporally resolveddatabases for canonical configurations to either confirm historicalresults or to provide data in an unexplored parameter region. Fidelity and completeness for theoretical/computational validation is a key attribute of theproposed experimental data. Artificial intelligence (AI)/machine learning:Innovative AI ideas related to the use of machine learning and other AI approaches in fluid dynamics research to model and control the flows are encouraged.Verifying new models with canonicalconfigurations, when appropriate, is encouraged for theComputational andData-Enabled Science & Engineering(CDS&E) program. Instrumentation and Flow Diagnostics: Instrument development for time-space resolvedmeasurements; shear stress sensors; novel flow imaging; and velocimetry. NOTE:Proposals that use fluid flows as a boundary input condition or a driving force in a problem do not fit within the scope of this program. Proposals focused on particulates (including droplets) two-way coupled with fluids, colloids, and multiphase rheology and processes should be directed to the Particulate andMultiphase Processesprogram. Proposals dealing mainly with materials synthesis, processing and characterization may be more suitable for theAdvanced Manufacturingprogramin the Division of Civil, Mechanical, and Manufacturing Innovation orprograms in theDivision of Materials Research. Proposals dealing primarily with sensors and controls may be more suitable for the Dynamics, Controls, & Cognition program in the Division of Civil, Mechanical, and Manufacturing Innovation. Proposals focused on biological systems may be more suitable forPhysiological and Structural Systemsin the Division of Integrative Organismal Systems. INFORMATION COMMON TO MOST CBET PROGRAMS Proposals should address the novelty and/or potentially transformative nature of the proposed work compared to previous work in the field.Also, it is important to address why the proposed work is important in terms of engineering science, as well as to also project the potential impact on society and/or industry of success in the research.The novelty or potentially transformative nature of the research should be included, as a minimum, in the Project Summary of each proposal. The duration of unsolicited proposal awards in CBET is generally up to three years. Single-investigator award budgets typically include support for one graduate student (or equivalent) and up to one month of PI time per year(awards for multiple investigator projects are typically larger). Proposal budgets that are much larger than typical should be discussed with the program director prior to submission. Proposers can view budget amounts and other information from recent awards made by this program via the "What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)" link towards the bottom of this page. Faculty Early Career Development(CAREER)program proposals are strongly encouraged.Award duration is five years.The submission deadline for Engineering CAREER proposals is in July every year. Learn more in the CAREER program description . Proposals for Conferences, Workshops, and Supplements: PIs are strongly encouraged to discuss their requests with the program director before submission of the proposal. Grants forRapid Response Research(RAPID)andEArly-concept Grants for Exploratory Research(EAGER)are also considered when appropriate.Please note that proposals of these types must be discussed with the program director before submission.Grant Opportunities for Academic Liaison with Industry (GOALI)proposals that integrate fundamental research with translational results and are consistent with the application areas of interest to each program are also encouraged. Please note that RAPID, EAGER, and GOALI proposals can be submitted anytime during the year. Details about RAPID, EAGER, and GOALI are available in the Proposal & Award Policies & Procedures Guide (PAPPG), Part 1, Chapter II, Section E: Types of Proposals. Compliance: Proposalsthat are not compliant with the Proposal & Award Policies & Procedures Guide (PAPPG) will be returned without review.
Renovate communal built heritage
France · Auvergne-Rhône-Alpes
Who can apply Commune · Intercommunalité / Pays
Aid for the energy improvement of public buildings. Grant calculated per work item: 50% of the ex-tax investment expenses on the first 20,000 €, then 20% up to 50,000 €. 16,000 € maximum per work item; 48,000 € maximum per commune per year; not cumulative with CEE (transferred to TE-38 in exchange for the grant) Reserved for communes that have transferred the collection of their TCCFE to TE-38, or for inter-communal buildings located in the territory of one of these communes.
Check whether your organisation is eligible
Create your profile and Captaru scores every call against your organisation, sector and region. It also helps you draft the application.